Product no.: TTR-0680
New shocks are no longer available from Yamaha :-( Myself and Brian Sussex have rebuilt an old one of mine, using the parts from the shop TTR-0843 and TTR-0438 See this guide for full details on fitting a replacement seal head to your TTR250 rear shock absorber. Not as hard as it seemed ;-) |
£0.00
*
Currently unavailable |
Product no.: TTR-0843
Nitrogen needle with Schrader valve conversion kit to allow you to check the pressure in your rear shock absorber and re-pressurise if necessary. See this guide for full details on fitting a replacement seal head to your TTR250 rear shock absorber. You will need some PTFE or sealent tape, for fitting the kits together, easily purchased from a plumbers shop. |
£22.00
*
In stock |
|
Product no.: TTR-0438
Shock absorber - seal head or block See this guide for full details on fitting a replacement seal head to your TTR250 rear shock absorber. You will also be able to see how to use the needle kit for testing how much pressure you have in your shock, very handy indeed :-) The dimensions quoted are: Rod 14.00mm x OD. 46mm x Length 43.00mm / L1 = 14mm / L2 = 29mm and snap ring 46mm x 2mm Round. |
£37.00
*
In stock |
|
Product no.: TTR-0294
Rear shock top bearing kit - will fit all Open Enduro white and blue TTR250 models - but NOT the Raid The kit completely replaces all of the components in the top shock absorber mounting. Developed by the late Andy "Fixer" Lander-Stow when faced with a £72 bill for the genuine Yamaha parts needed for the job! The bushes are made from Polyurethane, the spacer is stainless steel and more than enough silicone grease is included to do the job (Please note we cannot include the grease with international orders due to shipping restrictions) The kit includes a spreader bolt, nuts and washer to enable an easy'ish' fitment. **TO KEEP OUR PLASTIC USE DOWN, THE SILICONE GREASE PACKAGE IS NO LONGER SUPPLIED** |
£32.00
*
Still in stock |
|
Product no.: TTR-0546
Pre-load C shock wrench. Universal single shock pre-load adjuster with a PVC coated handle. Works well on the TTR250 shock absorber spring collars. This is the tool I use. |
£9.75
*
In stock |
|
Product no.: TTR-0424
HD Coil Spring Compressor
Bolts are made from chrome alloy steel. Claw jaws are constructed from forged chrome alloy Includes 4 plastic insert jaws to protect the colour coating of the spring |
£38.64
*
In stock |
|
Product no.: TTR-0855
Genuine Yamaha bolt for the lower part of the rear shock No 12 in the picture
Can be the culprit of unwanted movement. |
£7.50
*
In stock |
|