Hard wearing Talon 48 tooth "Gold" aluminium sprocket.

It offers significant weight saving over it's steel equivalent.

 We only sell the Renthal Works 520 R3.3 O Ring . These have replaced the old R3 Chain.

After a lot of practical research on the roads and green lanes of Devon, these chains have proved to give exceptional service. Also fits Yamaha WR250R and WR250X models

It is a 118 link chain which fits all the combinations of TTR250, WR250R/X and WR250F sprockets that we sell although it will need some links taking out for smaller sprocket sets. This is easily done with a chain breaker. Guide to shortening a chain here.

This 520 o-ring chain is designed for the extreme rigours of off road use.

The pack contains both a rivet (soft) and a split link plus rubber gloves and sticker.

NB The original chain and sprockets on a Raid are 428 so this chain will only fit if the sprockets are upgraded at the same time to match.

Additional rivet link for Renthal R3 chains

Additional split link for Renthal R3 chains

After-market CSK replacement screws - good match for the originals. Zinc plated mild steel.

Chain Block - small white slipper - aftermarket replacement for 2-bolt chain guides

Chain guide (2-bolt) - fits most years and models including the Raid

Brand new Yamaha part.

The white plastic chain block is often cracked or damaged as it is vulnerable in its position underneath the swing arm.

An excellent addition to your tool kit!

Most chains are too long to use out of the packet to allow for accurate adjustment, so this is the perfect tool to cut your chain to the correct length required for your TTR.

Works well with soft links but you will need to grind the heads off of hardened pins before use e.g. where you are shortening a chain. Make sure that you remove both pins equally so as not to bend the backplate.

See the guide to shortening a chain here

Easy to use and no loose parts to lose.

 TT250R genuine Yamaha chain guard - fits blue model and most Raid models

Helps keep the dirt from dropping on the chain and being ground in by the sprocket.

An essential item if you want to get good mileage out of your chain!

This aluminium cover fits over the white plastic chain block to give it some protection from rocks, etc.

This after-market part has been specially made for Totally TTRs and isn't available from any other supplier.

Please check your chain block to make sure it will fit. You should have a chain block like TTR-0067 in the shop.