Accessories for Carb Diaphragm - genuine Yamaha part

Terms and Conditions

Sign in

Basket

Your basket is empty.

Carb Diaphragm - genuine Yamaha part

Carb Diaphragm - genuine Yamaha part Product no.: TTR-0042 Carburettor diaphragm - fits all TTR models including the Raid Genuine Yamaha part. If you also need the two small O rings that sit alongside the diaphragm then we have some after-market Viton 75 ones in the shop. To help get a good seal, make sure all corrosion etc is cleaned off the diaphragm cover before refitting. I rub the cover on a sheet of fine wet & dry paper on a dead flat surface to give it the best possible chance.	£42.00 * In stock

Accessories

Carb Diaphragm O ring seals x2

Carb Diaphragm O ring seals x2 Product no.: TTR-0043 These two small after-market Viton 75 O rings sit alongside the diaphragm. If you are removing the diaphragm cover on your carb to replace the diaphragm or whatever, best to replace these little O rings to save having to later if the cover leaks! To help get a good seal, make sure all corrosion etc is cleaned off the cover before refitting, I rub the cover on a sheet of fine wet & dry paper on a dead flat surface to give it the best possible chance.	£1.20 * Still in stock

Carb diaphragm cover - set of 2 screws

Carb diaphragm cover - set of 2 screws Product no.: TTR-0542 A pair of screws to attach the carb diaphragm cover	£1.00 * Currently unavailable

Carb Diaphragm Spring- Genuine Yamaha part

Carb Diaphragm Spring- Genuine Yamaha part Product no.: TTR-0709 Genuine yamaha part No 38 in the fische does diaphragm at the bottom and lever spring at the top.	£9.20 * In stock

All Balls Carburettor repair kit - (1999 to 2016 - all models)

All Balls Carburettor repair kit - (1999 to 2016 - all models)

Product no.: TTR-0767

All Balls
Carburetor Repair Kit TTR 250

Here is what all balls say about the kits......

Type:	Rebuild Kit
Sold as:	Each

Kits include most of the components necessary to repair a carburetor: O-rings, gaskets, jets, needle, mixture screw, float bowl screws, float valve needle and seat.
Nitrile rubber material is used on all O-rings and rubber gaskets.
High performance Interface gasket material is used for all paper gasket applications.
OEM jet sizes are included in the kit.

Here is what I have added after some fitting issues.....

I have added 2 x Carb diaphragm O ring seals to the kits (not in the main picture) and the 2 screws for the diaphragm cover.
Correct fitting screws and locking washers x3 have been added to the All Balls kits, for the float bowl cover.
I have also supplied correct fitting O ring for the pilot screw, as the All Balls one is too small.

If your carb is leaking fuel at the bottom, you may also need to order a new diaphragm.

£39.00 *

In stock