Product no.: TTR-0179
Fits all standard TTR exhausts New after-market exhaust clamp - a good replacement for the original If you need just the bolt, new bolts for the clamps are available separately |
£3.00
*
In stock |
|
Product no.: TTR-0177
Custom exhaust header pipe in stainless steel - fits all models and years including the Raid Manufactured in good quality polished stainless steel by a local Devon firm Pheonix Exhaust who specialise in making exhausts for Ferraris, Porches etc & not available from any other supplier to the best of my knowledge. Welded captive nuts to hold the standard TTR heat shield (heat shield not included). Easy fit - see https://youtu.be/0b7zTLpl46U Apparently a shorter header pipe such as this produces more power on a TTR whereas a bigger bore header pipe doesn't. Fred from QLD, Australia, said "By the way, the shorty pipe I got off of you last order is amazing and works a treat. Different bike completely!" A customer on the TTR250 forum said : "Have already fitted the short primary pipe available from Totally TTRs and noticed an improvement in mid-range torque." Another said "On my TTR the shorty header pipe was good for an extra 1.5 hp on the dyno. A quick spin and it feels like it now builds revs a lot faster, definitely noticeable and the bike feels faster. 21.5bhp to 23bhp - a 7 percent increase with header pipe alone!" A copy of the dyno result is in the photos. I think it looks very good plus, for riders into any kind of travel e.g. long distance self supporting adventure overlanding, it gives space to mount a tool kit/lock/stand combo on the lower front frame tube - see Robin Webb's TTR on the Salt & Gold DVD. UNFORTUNATELY THESE ARE NOT SUITABLE FOR USE WITH OIL COOLERS AS THE COOLER PIPES WILL FOUL THE HEADER PIPE Please be aware if you have a CRD exhaust or some other aftermarket exhaust (other than ours) you may have to extend your exhaust pipe a little, this may mean welding a bit extra pipe on your exhaust. Mat who has a CRD made me aware of this problem, thanks Mat :-) |
£160.00
*
Currently unavailable |
Product no.: TTR-0178
New after-market exhaust clamp bolt - fits all standard TTR exhausts - also a perfect replacement for the front fork clamp bolts! A good replacement for the originals. |
£1.00
*
Currently unavailable |
Product no.: TTR-0397
A standard TTR250 used exhaust header pipe - fits all models. The header pipe is in great condition and has only a minor dint that I can see but its underneath and out of sight. The pipe would have been nearly £340 new when they were available so grab a bargain! |
£30.00
*
In stock |
|
Product no.: TTR-0881
Pleased to finally get some full Stainless steel exhausts back in the shop :-) They are a quality bit of kit,from Phoenix exhaust, the same company in Devon that make our shorty header pipes. Fully tested on a completely standard TTR, no re jetting the carb was necessary, making this a plug and play product. Good weight saving over the original. Quality stainless steel. Db has increased by about 10% over the standard exhaust, but this is a nice raspy sound, not a offensive noise. I have made a litlle Db killer that is included and makes it a little quieter if preferred. *Please note* I have included a New graphite gasket and exhaust clamp into the price, saving you Just under £10 :-) Postage cost may vary from the shop and I will be in contact if this is the case, *especially overseas customers* Steve
|
£328.00
*
In stock |
|
Product no.: TTR-0631
Exhaust gasket - fits phoenix and Motad a silencers This is a graphite type gasket that goes between the header pipe and the exhaust. This is thicker than a standard Gasket and will not fit the original exhaust. We can also supply the copper/asbestos gasket ring that fits between the header pipe and exhaust port. |
£6.50
*
In stock |
|
Product no.: TTR-0968
A standard TTR250 used exhaust header pipe - fits all models. The header pipe is in great condition and has a dint or two but they are underneath and out of sight. The pipe would have been nearly £340 new when they were available so grab a bargain! |
£28.00
*
In stock |
|
Product no.: TTR-0558
A standard TTR250 used exhaust header - fits all models The header pipe is in great condition with no obvious dings - very unusual for a used header! The pipe would have been nearly £340 new when they were available so grab a bargain! |
£35.00
*
Currently unavailable |