Accessories


Product no.: TTR-0211

Enduro (or Dakar) High bars - Renthal 613s  - fit all models and years including the Raid

Silver with black pad, these are the tallest 7/8" Renthals available & look very very nice!
Ideal if you are taller, the extra height encourages you to stand and the extra width gives greater control.

You will need to get our longer cables with these.

See the accessories list below for our extra long cables and selection of bar risers and grips etc.

Also fits Yamaha WR250R and WR250X models

 

 

 

 

 

 

 

£39.50 *

Still in stock

Accessories

Product no.: TTR-0202

Pair of Venhill Replacement Throttle cables - extra length - fits ALL models and years of TTR250s

We have replacement top quality cables made up especially for Totally TTRs by Venhill.
Manufactured to give 150mm extra length to accommodate raised bars. 
A cheaper alternative
 to the standard Yamaha cables even if you are not using risers.

Venhill's advice on installation and maintenance here: http://www.venhill.co.uk/content.asp?PageID=418&ThreadID=418

 

£26.80 *

Still in stock

Product no.: TTR-0198

Vennhill Replacement Clutch cable - extra length - fits ALL models and years of TTR250s

We have replacement top quality cables made up especially for Totally TTRs by Venhill.

Manufactured to give 150mm extra length to accommodate raised bars. 
A cheaper alternative
 to the standard Yamaha cables even if you are not using risers.

Fitting guide here.

Venhill's advice on installation and maintenance here: http://www.venhill.co.uk/content.asp?PageID=418&ThreadID=418

£21.60 *

Currently unavailable

Product no.: TTR-0195

Bar risers - Fits all TTR250 models including the Raid - but not Fatbars. Also fits Yamaha WR250R and WR250X models

Brand new risers made specifically for Yamaha Dirt and Dual Sport bikes with 7/8" handlebars 

The kit includes spacers needed to give a choice of 4 heights with appropriate longer sets of four stainless steel bolts

Five minute install - no changes necessary in cables, etc. 

Fits into the original bar mounts and allows you to raise the bars in increments of 5mm - 20mm, 25mm, 30mm and 35mm.

Raising your handlebars by even a small amount will make your bike more comfortable. If you feel awkward when standing, like you may fall forward if you touch the brakes, or if you feel like you are constantly leaning forward on the bars when riding straight and level, raising the handlebar height will make all the difference. The bike feels more controllable, standing or sitting. Saves lower back pains and aching wrists when riding!

£27.80 *

Currently unavailable

Product no.: TTR-0194

30mm handlebar risers 

30mm (or 1 1/5") aluminium CNC finished handlebar risers for 22.2mm (or 7/8") handlebars 

Raising your handlebars by even a small amount will make your bike more comfortable. If you feel awkward when standing, like you may fall forward if you touch the brakes, or if you feel like you are constantly leaning forward on the bars when riding straight and level, raising the handlebar height will make all the difference. The bike feels more controllable, standing or sitting.

1_inch_bar_risers1

£22.00 *

Currently unavailable

Product no.: TTR-0193

Bar "spacer" risers - will fit all TTR250 models including the Raid.

A very simple modification that raises the bars by 6mm. This is the maximum possible whilst allowing the retaining locknuts to stay on the thread. These spacers have been made up especially for Totally TTRs.

The kit includes the two spacers as shown. Five minute install. No changes necessary in cables, etc. 

Raising your handlebars by even a small amount will make your bike more comfortable. If you feel awkward when standing, like you may fall forward if you touch the brakes, or if you feel like you are constantly leaning forward on the bars when riding straight and level, raising the handlebar height will make all the difference. The bike feels more controllable, standing or sitting.

This picture shows just one of the spacers fitted to demonstrate where they go and show how easy they are to fit.

The kit fits under the original bar mounts and also allows you to drop the fork legs up through the yokes by a further 6mm if you are trying to lower the front as shown on my own TTR in this picture.

    

 

 

 

 

 

 

 

 

 

 

 

 

        

 

 

 

 

£5.50 *

Still in stock

Product no.: TTR-0215

Throttle tube - fits all TTR models including the Raid

New genuine Yamaha TTR250 throttle tube

£13.00 *

Currently unavailable

Product no.: TTR-0206

First oversize barrel and matching Wossner piston kit - ready to fit!

Mega time saving for you, just bolt on run in and job done.

Don't forget to order any gaskets that you will need ;-)

 

£250.00 *

In stock

Product no.: TTR-0210

TT250R (all models) -  Progrip grips

Really nice Progrip Soft Touch "Cross" grips

NB these grips are MX sized - 115mm long which may require trimming back the throttle tube

 

Also fits Yamaha WR250R and WR250X models

£11.50 *

Currently unavailable

Product no.: TTR-0209

TT250R (all models) -  Progrip grips

Really nice Progrip Soft Touch "Cross" grips

NB these grips are MX sized - 115mm long which may require trimming back the throttle tube

 

Also fits Yamaha WR250R and WR250X models

£11.90 *

In stock

Product no.: TTR-0208

These are 125mm long so a good fit on the standard throttle tube. They make life a bit easier if you have wrap around hand guards as you don't have to saw or cut the end of the grips!

 

Also fits Yamaha WR250R and WR250X models

£10.50 *

In stock

Product no.: TTR-0212

TT250R handlebar top clamps - fits all models

Genuine new Yamaha part.

Only one pair available!

  

£25.00 *

In stock