Product no.: TTR-0438

Shock absorber - seal head or block

See this guide for full details on fitting a replacement seal head to your TTR250 rear shock absorber.

You will also be able to see how to use the needle kit for testing how much pressure you have in your shock, very handy indeed :-)

The dimensions quoted are:

Rod 14.00mm x OD. 46mm x Length 43.00mm / L1 = 14mm / L2 = 29mm and snap ring 46mm x 2mm Round. 

£37.00 *

In stock

Accessories

Product no.: TTR-0844

Drill and tap for fitting Schrader valve to shock reservoir. The actual Schrader valve is not included - you will have to find your own from an old inner tube or tyre fitters.

See this guide for full details on fitting a replacement seal head to your TTR250 rear shock absorber.

Product no.: TTR-0843

Nitrogen needle with Schrader valve conversion kit to allow you to check the pressure in your rear shock absorber and re-pressurise if necessary.

See this guide for full details on fitting a replacement seal head to your TTR250 rear shock absorber.

You will need some PTFE or sealent tape, for fitting the kits together, easily purchased from a plumbers shop.

£22.00 *

In stock