These are 125mm long so a good fit on the standard throttle tube. They make life a bit easier if you have wrap around hand guards as you don't have to saw or cut the end of the grips!

Also fits Yamaha WR250R and WR250X models

TT250R (all models) -  Progrip grips

Really nice Progrip Soft Touch "Cross" grips

NB these grips are MX sized - 115mm long which may require trimming back the throttle tube

Also fits Yamaha WR250R and WR250X models

TT250R (all models) -  Progrip grips

Really nice Progrip Soft Touch "Cross" grips

NB these grips are MX sized - 115mm long which may require trimming back the throttle tube

Also fits Yamaha WR250R and WR250X models

Polisport "Integral" handguards - fits all models and years including the Raid

I use these on my own TTR and they are really good. They have taken some very heavy knocks with no problem at all. They don't have metal inserts but that doesn't seem to be an issue!

The guards come with an integral spoiler - see pic above.

NB: The package includes the mounting kit that fits into the open ends of the handlebars for both 14mm and 18mm internal diameter bars. Most Renthal bars are 14mm and the standard steel TTR bars need the 18mm kit. 

Also fits Yamaha WR250R and WR250X models

The fittings included with the handguards are shown below.

Polisport "Integral" handguards - fits all models and years including the Raid

I use these on my own TTR and they are really good. They have taken some very heavy knocks with no problem at all. They don't have metal inserts but that doesn't seem to be an issue!

The guards come with an integral spoiler - see pic above.

NB: The package includes the mounting kit that fits into the open ends of the handlebars for both 14mm and 18mm internal diameter bars. Most Renthal bars are 14mm and the standard steel TTR bars need the 18mm kit. 

Also fits Yamaha WR250R and WR250X models

The fittings included with the handguards are shown below.

An excellent addition to your tool kit!

Most chains are too long to use out of the packet to allow for accurate adjustment, so this is the perfect tool to cut your chain to the correct length required for your TTR.

Works well with soft links but you will need to grind the heads off of hardened pins before use e.g. where you are shortening a chain. Make sure that you remove both pins equally so as not to bend the backplate.

See the guide to shortening a chain here

Easy to use and no loose parts to lose.

Clutch springs can get tired after miles of heat and use.

EBC spring kits are 10% stiffer than standard and are sold in sets of 6.

Owners are advised that clutch lever will feel slightly heavier when uprating springs, and to test ride to acquaint themselves with the change in control.

Also fits Yamaha WR250R and WR250X models

Psychic friction clutch plate set. Also fits Yamaha WR250R and WR250X models

A cost effective replacement option for your worn original friction plates!

Heavy duty EBC clutch springs available in this shop.

Installation guide here

30mm handlebar risers 

30mm (or 1 1/5") aluminium CNC finished handlebar risers for 22.2mm (or 7/8") handlebars 

Raising your handlebars by even a small amount will make your bike more comfortable. If you feel awkward when standing, like you may fall forward if you touch the brakes, or if you feel like you are constantly leaning forward on the bars when riding straight and level, raising the handlebar height will make all the difference. The bike feels more controllable, standing or sitting.

Bar risers - Fits all TTR250 models including the Raid - but not Fatbars. Also fits Yamaha WR250R and WR250X models

Brand new risers made specifically for Yamaha Dirt and Dual Sport bikes with 7/8" handlebars 

The kit includes spacers needed to give a choice of 4 heights with appropriate longer sets of four stainless steel bolts

Five minute install - no changes necessary in cables, etc. 

Fits into the original bar mounts and allows you to raise the bars in increments of 5mm - 20mm, 25mm, 30mm and 35mm.

Raising your handlebars by even a small amount will make your bike more comfortable. If you feel awkward when standing, like you may fall forward if you touch the brakes, or if you feel like you are constantly leaning forward on the bars when riding straight and level, raising the handlebar height will make all the difference. The bike feels more controllable, standing or sitting. Saves lower back pains and aching wrists when riding!